The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
Download
Publications Copernicus
Download
Citation
Articles | Volume XLII-3
https://doi.org/10.5194/isprs-archives-XLII-3-843-2018
https://doi.org/10.5194/isprs-archives-XLII-3-843-2018
30 Apr 2018
 | 30 Apr 2018

RADIOMETRIC CROSS-CALIBRATION OF GAOFEN-1 WFV CAMERAS WITH LANDSAT-8 OLI AND MODIS SENSORS BASED ON RADIATION AND GEOMETRY MATCHING

J. Li, Z. Wu, X. Wei, Y. Zhang, F. Feng, and F. Guo

Keywords: Radiometric Cross-Calibration, Geometry Matching, Radiative Transfer Model, Water Vapor Effects, Synchronization Verification

Abstract. Cross-calibration has the advantages of high precision, low resource requirements and simple implementation. It has been widely used in recent years. The four wide-field-of-view (WFV) cameras on-board Gaofen-1 satellite provide high spatial resolution and wide combined coverage (4 × 200 km) without onboard calibration. In this paper, the four-band radiometric cross-calibration coefficients of WFV1 camera were obtained based on radiation and geometry matching taking Landsat 8 OLI (Operational Land Imager) sensor as reference. Scale Invariant Feature Transform (SIFT) feature detection method and distance and included angle weighting method were introduced to correct misregistration of WFV-OLI image pair. The radiative transfer model was used to eliminate difference between OLI sensor and WFV1 camera through the spectral match factor (SMF). The near-infrared band of WFV1 camera encompasses water vapor absorption bands, thus a Look Up Table (LUT) for SMF varies from water vapor amount is established to estimate the water vapor effects. The surface synchronization experiment was designed to verify the reliability of the cross-calibration coefficients, which seem to perform better than the official coefficients claimed by the China Centre for Resources Satellite Data and Application (CCRSDA).