EVALUATING THE VARIATIONS IN THE FLOOD SUSCEPTIBILITY MAPS ACCURACIES DUE TO THE ALTERATIONS IN THE TYPE AND EXTENT OF THE FLOOD INVENTORY

Abstract. This paper explores the influence of the extent and density of the inventory data on the final outcomes. This study aimed to examine the impact of different formats and extents of the flood inventory data on the final susceptibility map. An extreme 2011 Brisbane flood event was used as the case study. LR model was applied using polygon and point formats of the inventory data. Random points of 1000, 700, 500, 300, 100 and 50 were selected and susceptibility mapping was undertaken using each group of random points. To perform the modelling Logistic Regression (LR) method was selected as it is a very well-known algorithm in natural hazard modelling due to its easily understandable, rapid processing time and accurate measurement approach. The resultant maps were assessed visually and statistically using Area under Curve (AUC) method. The prediction rates measured for susceptibility maps produced by polygon, 1000, 700, 500, 300, 100 and 50 random points were 63 %, 76 %, 88 %, 80 %, 74 %, 71 % and 65 % respectively. Evidently, using the polygon format of the inventory data didn’t lead to the reasonable outcomes. In the case of random points, raising the number of points consequently increased the prediction rates, except for 1000 points. Hence, the minimum and maximum thresholds for the extent of the inventory must be set prior to the analysis. It is concluded that the extent and format of the inventory data are also two of the influential components in the precision of the modelling.