ISPRS-Archives ISPRS - International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences ISPRS-Archives Int. Arch. Photogramm. Remote Sens. Spatial Inf. Sci. 2194-9034 Copernicus Publications Göttingen, Germany 10.5194/isprs-archives-XLII-4-W9-35-2018 EVALUATING THE PERFORMANCE OF TERRESTRIAL LASER SCANNING FOR LANDSLIDE MONITORING Mat Zam P. M. 1 Fuad N. A. 1 Yusoff A. R. 1 Majid Z. 1 Geospatial Imaging and Information Research Group, Faculty of Built Environment and Surveying, Universiti Teknologi Malaysia, Johor, Malaysia 26 10 2018 XLII-4/W9 35 55 This work is licensed under the Creative Commons Attribution 4.0 International License. To view a copy of this licence, visit https://creativecommons.org/licenses/by/4.0/ This article is available from https://isprs-archives.copernicus.org/articles/isprs-archives-XLII-4-W9-35-2018.html The full text article is available as a PDF file from https://isprs-archives.copernicus.org/articles/isprs-archives-XLII-4-W9-35-2018.pdf

Nowadays, Terrestrial Laser Scanning (TLS) technology is gaining popularity in monitoring and predicting the movement of landslide due to the capability of high-speed data capture without requiring a direct contact with the monitored surface. It offers very high density of point cloud data in high resolution and also can be an effective tool in detecting the surface movement of the landslide area. The aim of this research is to determine the optimal level of scanning resolution for landslide monitoring using TLS. The Topcon Geodetic Laser Scanner (GLS) 2000 was used in this research to obtain the three dimensional (3D) point cloud data of the landslide area. Four types of resolution were used during scanning operation which were consist of very high, high, medium and low resolutions. After done with the data collection, the point clouds datasets were undergone the process of registration and filtering using ScanMaster software. After that, the registered point clouds datasets were analyzed using CloudCompare software. Based on the results obtained, the accuracy of TLS point cloud data between picking point manually and computed automatically by ScanMaster software shows the maximum Root Mean Square (RMS) value of coordinate differences were 0.013 m in very high resolution, 0.017 m in high resolution, 0.031 m in medium resolution and 0.052 m in low resolution respectively. Meanwhile, the accuracy of TLS point cloud data between picking point manually and total station data using intersection method shows the maximum RMS values of coordinate differences were 0.013 m in very high resolution, 0.018 m in high resolution, 0.033 m in medium resolution and 0.054 m in low resolution respectively. Hence, it can be concluded that the high or very high resolution is needed for landslide monitoring using Topcon GLS-2000 which can provide more accurate data in slope result, while the low and medium resolutions is not suitable for landslide monitoring due to the accuracy of TLS point cloud data that will decreased when the resolution value is increased.