The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
Download
Publications Copernicus
Download
Citation
Articles | Volume XLIII-B1-2021
https://doi.org/10.5194/isprs-archives-XLIII-B1-2021-133-2021
https://doi.org/10.5194/isprs-archives-XLIII-B1-2021-133-2021
28 Jun 2021
 | 28 Jun 2021

AUTOMATED REFLECTANCE TARGET DETECTION FOR AUTOMATED VICARIOUS RADIOMETRIC CORRECTION OF UAV IMAGES

S. Ban and T. Kim

Keywords: UAV, Radiometric calibration, Reflectance target, Digital number, Canny edge detection, Automatic detection

Abstract. Recently, with increasing use of unmanned aerial vehicle (UAV), radiometric calibration of UAV images has become an important pre-processing step for application such as vegetation mapping, crop field monitoring, etc. In order to obtain accurate spectral reflectance, some UAVs measure irradiance at the time of image acquisition. However, most of UAV systems do not have such irradiance sensors. In these cases, vicarious radiometric correction method has to be used. Digital numbers (DNs) of imaged ground reflectance targets are measured and spectral reflectance is acquired from with known reflectance values of the targets. For automated vicarious calibration, a technique for automatically detecting image location of ground reflectance targets has been developed. In this study, we report an improved version of automated reflectance target detection and a new semi-automatic reflectance target detection developed. Test results showed that among the 14 reflectance targets, 13 targets were detected with the automatic target detection method. The undetected target was extracted by the proposed semi-automatic target detect method. Additional test was conducted on the remaining targets to confirm the applicability of our semi-automatic target detection method. As a result, other targets were also detected. The proposed automated and semi-automated target detection method can be used for automated vicarious calibration of UAV images.