A

AbdelGafar, O.

• Estimating laser scanner’s effective laser beam footprint using line spread function, pages 121–128

Abdelmageed, M. G.

• Design and Development of a Livox-Based Indoor Surveying System for Floor Mapping Applications, pages 145–150

Accadia, T.

• CO3D Image Quality Calibration, pages 523–530
• 3D Product Quality Control in the CO3D Mission: A Critical Role, pages 547–552

Achim, A.

• Updating Forestry Road networks in Ontario Using Single Photon LiDAR and Deep Learning-enhanced algorithms, pages 421–427

Ahmed, W.

• Design and Development of a Livox-Based Indoor Surveying System for Floor Mapping Applications, pages 145–150

Ait El Kadi, K.

• The Use of Geospatial Artificial Intelligence Technologies (GeoAI) within National Mapping Agencies: A Review, pages 473–482

Amorim, E.

• Comparative Analysis of UAS Photogrammetric Accuracy: Influence of Flight Altitude on Accuracy and Operational Efficiency in Urban Mapping, pages 347–351

Amram, O.

• Radiometric features and ground processing for high-resolution Earth observation satellite Bayer matrix-based images like CO3D, pages 353–360

Amrullah, C.

• Integrating Advanced AI techniques to assist Urban Digital Twins Generation, pages 607–613

Asahi, Y.

• Geometric performance of the small satellite CE-SAT-IE carrying an optical sensor derived from the COTS camera Canon EOS R5, pages 333–340

Auer, S.

• Integrating Advanced AI techniques to assist Urban Digital Twins Generation, pages 607–613

Avesani, L.

• Comparative Assessment of GeoAI-Based Frameworks for Automatic Urban Tree Cover Mapping, pages 449–455

B

Baby-Bouchard, E.

• Updating Forestry Road networks in Ontario Using Single Photon LiDAR and Deep Learning-enhanced algorithms, pages 421–427

Baldin, C. M.

• Radiometric Intercalibration Methodologies for High-Resolution Satellite Imagery in Precision Agriculture, pages 231–238

Balestra, M.

• UAV data fusion approach to assess vegetation recovery dynamics after pipeline construction, pages 405–412

Bannakulpiphat, T.

• Comprehensive Evaluation of Small-Format Multi-Head Camera Systems for 3D Topographic Mapping, pages 239–246

Baraka, M.

• Design and Development of a Livox-Based Indoor Surveying System for Floor Mapping Applications, pages 145–150

Barazzetti, L.

• Evaluation of TLS and PMLS Sensors for Cultural Heritage Documentation and HBIM Modelling: The Case Study of San Giacomo Church in Como, Italy, pages 151–159

Bellet, V.

• CNES CO3D Image Ground Segment, pages 539–545
• 3D Product Quality Control in the CO3D Mission: A Critical Role, pages 547–552

Beloiu, M.

• Improving Tree Species Detection for Operational Forestry: The Role of Dataset Design, pages 413–420

Bennett, L.

• A Generative Upsampling Framework for Reconstructing High-Density Tree Structures from Low-Density Airborne Lidar, pages 435–442

Binapfl, S.

• Assessing Trajectory Accuracy of the CHCNAV RS10 Handheld Laser Scanner, pages 129–136

Bittner, K.

• Integrating Advanced AI techniques to assist Urban Digital Twins Generation, pages 607–613

Boccardo, P.

• Developing an Urban Road Dataset: A Multi-Sensor Framework for DT and AI-Based Road Infrastructure Management, pages 565–573

Boisvert, J.

• A Generative Upsampling Framework for Reconstructing High-Density Tree Structures from Low-Density Airborne Lidar, pages 435–442

Bonacoscia, M.

• UAV data fusion approach to assess vegetation recovery dynamics after pipeline construction, pages 405–412

Bongartz, J.

• PanX.4: A Gyrocopter-Borne Six-Band VNIR Multicamera System for Sentinel-2-Aligned Multitemporal Vegetation Monitoring, pages 93–101

Borovcnik, A.

• LiDAR-Camera Integration for High Precision Airborne Mapping, pages 323–331

Broch, S.

• Improving Tree Species Detection for Operational Forestry: The Role of Dataset Design, pages 413–420

Bruno, M.

• CO3D Image Quality Calibration, pages 523–530

Brzozowska-Jawornicka, A.

• Evaluating RTK GNSS-Assisted Close-Range Photogrammetry for Cultural Heritage Applications without GCPs, pages 315–321

Buck, O.

• From BIM–SAR Fusion to API-Based Digital Twin Services for Building Deformation Monitoring, pages 583–588

Buffe, F.

• Line of Sight Calibration for Satellite Imagery Based on Matrix Detector, pages 271–278
• CO3D Image Quality Calibration, pages 523–530
• The CO3D mission, a worldwide one-meter accuracy Digital Surface Model, pages 531–538

Di Benedetto, A.

• A pipeline for automatic building reconstruction for Digital Twins in complex urban environments, pages 553–558

C

Cai, Y.

• Vectorized Grid Detection and Color Rectification for 3D Point Clouds of Photovoltaic Panels, pages 137–143

Campos, M.

• Linking TreeQSM with SAR and ALS to Detect Internal Canopy Allocation Shifts Across Scales, pages 457–464

Candela, L.

• A pipeline for automatic building reconstruction for Digital Twins in complex urban environments, pages 553–558

Casella, V. M.

• Radiometric Intercalibration Methodologies for High-Resolution Satellite Imagery in Precision Agriculture, pages 231–238

Chagnon, C.

• Updating Forestry Road networks in Ontario Using Single Photon LiDAR and Deep Learning-enhanced algorithms, pages 421–427

Chambrelan, A.

• CO3D Image Quality Calibration, pages 523–530

Chan, T. O.

• Vectorized Grid Detection and Color Rectification for 3D Point Clouds of Photovoltaic Panels, pages 137–143

Chang, H.-J.

• Real-Time Mapping and Planning Intelligent Paths using Optical LiDAR and Quadruped Robot, pages 383–388

Chang, W.-Y.

• Real-Time Mapping and Planning Intelligent Paths using Optical LiDAR and Quadruped Robot, pages 383–388

Chang, Y.-F.

• An INS-Centric Locator for Autonomous Vehicles Aided by GNSS, Monocular Visual-Inertial Odometry, and HD Vector Maps, pages 361–368

Chasmer, L.

• A Generative Upsampling Framework for Reconstructing High-Density Tree Structures from Low-Density Airborne Lidar, pages 435–442

Chiang, K.-W.

• An INS-Centric Locator for Autonomous Vehicles Aided by GNSS, Monocular Visual-Inertial Odometry, and HD Vector Maps, pages 361–368

Chiappini, S.

• UAV data fusion approach to assess vegetation recovery dynamics after pipeline construction, pages 405–412
• Multi-Source Remote Sensing for Maritime Security: A Performance Evaluation of SAR and RGB Imagery for Small-Scale Fishing Vessel Detection, pages 621–628

Chikatsu, H.

• Range Error Detection and Evaluation for retroreflective Road Signs in Phase-Shift MMS Point Clouds, pages 9–15

Chizhova, M.

• Integrating timber stability analysis for building life cycle management and HBIM framework support, pages 559–564

Coelho Lopes, M.

• Geometric and Visual SLAM: The accuracy of modern handheld LiDAR scanners, pages 193–200

Coggiola, C.

• CO3D Image Quality Calibration, pages 523–530

Colleu, E.

• 3D Product Quality Control in the CO3D Mission: A Critical Role, pages 547–552

Collin, A.

• Enhancing hyperspectral VNIR spatial resolution on the coastal landscape: getting 63 bands at 3 m through the PRISMA VNIR and PlanetScope Dove-R fusion, pages 3–8

Crenganis, L.-M.

• Evaluation of the IGN FLAIR-HUB Model Transferability Performance for Land Cover Mapping in Iasi, Romania, pages 589–597

Crowley, M.

• A Generative Upsampling Framework for Reconstructing High-Density Tree Structures from Low-Density Airborne Lidar, pages 435–442

Cucci, D. A.

• Geometric and Visual SLAM: The accuracy of modern handheld LiDAR scanners, pages 193–200

D

Darwish, W.

• Design and Development of a Livox-Based Indoor Surveying System for Floor Mapping Applications, pages 145–150

Delaygue, N.

• CO3D Image Quality Calibration, pages 523–530

Dezio, C.

• Comparative Assessment of GeoAI-Based Frameworks for Automatic Urban Tree Cover Mapping, pages 449–455

Dick, A.

• CO3D Image Quality Calibration, pages 523–530

Didouz, Z.

• The Use of Geospatial Artificial Intelligence Technologies (GeoAI) within National Mapping Agencies: A Review, pages 473–482

Dorndorf, A.

• Experimental Assessment of Measurement Uncertainty for a Green-Wavelength LiDAR System, pages 175–183

Dorozynski, M.

• Zero-shot multi-class semantic segmentation of remote sensing images using SAM 2 with prior database information, pages 629–637

Dotti, A.

• Geometric and Visual SLAM: The accuracy of modern handheld LiDAR scanners, pages 193–200

Durozier, T.

• Enhancing hyperspectral VNIR spatial resolution on the coastal landscape: getting 63 bands at 3 m through the PRISMA VNIR and PlanetScope Dove-R fusion, pages 3–8

D’Amato, L.

• A pipeline for automatic building reconstruction for Digital Twins in complex urban environments, pages 553–558

d'Angelo, P.

• Integrating Advanced AI techniques to assist Urban Digital Twins Generation, pages 607–613

E

Echriti, R.

• Linking TreeQSM with SAR and ALS to Detect Internal Canopy Allocation Shifts Across Scales, pages 457–464

Eißing, T.

• Integrating timber stability analysis for building life cycle management and HBIM framework support, pages 559–564

El-Sheimy, N.

• Evaluation of VGGT with ALS Point Clouds for Large-Scale Dense Mapping, pages 77–82

ElShazly, A.

• Design and Development of a Livox-Based Indoor Surveying System for Floor Mapping Applications, pages 145–150

Elashry, A.

• Vehicle-Based Mobile Mapping Test Platform: Direct Georeferencing and TLS-Based Accuracy Assessment, pages 49–54

Elsisi, O.

• A Data-Driven Framework for Structural Crack Identification in 3D Mobile LiDAR Scans Using Deep Learning Classification Models, pages 185–192

Eltner, A.

• Assessing Trajectory Accuracy of the CHCNAV RS10 Handheld Laser Scanner, pages 129–136

F

Ferrà, C.

• Multi-Source Remote Sensing for Maritime Security: A Performance Evaluation of SAR and RGB Imagery for Small-Scale Fishing Vessel Detection, pages 621–628

Fiani, M.

• A pipeline for automatic building reconstruction for Digital Twins in complex urban environments, pages 553–558

Fiorani, A.

• Multi-Source Remote Sensing for Maritime Security: A Performance Evaluation of SAR and RGB Imagery for Small-Scale Fishing Vessel Detection, pages 621–628

Flatman, A. C.

• Aerial image quality control - spatial resolution, pages 489–495

Frank, C.

• PanX.4: A Gyrocopter-Borne Six-Band VNIR Multicamera System for Sentinel-2-Aligned Multitemporal Vegetation Monitoring, pages 93–101

França, L.

• Comparative Analysis of UAS Photogrammetric Accuracy: Influence of Flight Altitude on Accuracy and Operational Efficiency in Urban Mapping, pages 347–351

Fryskowska-Skibniewska, A.

• Integration of multi-source point clouds for bridge inventory – case study, pages 167–173

Fukushi, S.

• Range Error Detection and Evaluation for retroreflective Road Signs in Phase-Shift MMS Point Clouds, pages 9–15

G

Galdelli, A.

• Multi-Source Remote Sensing for Maritime Security: A Performance Evaluation of SAR and RGB Imagery for Small-Scale Fishing Vessel Detection, pages 621–628

Garioud, A.

• Evaluation of the IGN FLAIR-HUB Model Transferability Performance for Land Cover Mapping in Iasi, Romania, pages 589–597

Garramone, M.

• Evaluation of TLS and PMLS Sensors for Cultural Heritage Documentation and HBIM Modelling: The Case Study of San Giacomo Church in Como, Italy, pages 151–159

Geißendörfer, O.

• Point-based, profile-based and 3D point cloud-based vibration monitoring of structures: comparisons based on a lab experiment, pages 513–522

Ghanbari, H.

• Updating Forestry Road networks in Ontario Using Single Photon LiDAR and Deep Learning-enhanced algorithms, pages 421–427

Gill, E. W.

• A Self-Supervised Learning Framework for Methane Emission Detection Using Sentinel-2, pages 397–404

Gillespie, J.

• Capturing, processing and analysing 3D Data in a National Mapping Agency, pages 483–488

Giusti, F.

• UAV data fusion approach to assess vegetation recovery dynamics after pipeline construction, pages 405–412

Godet, A.

• 3D Product Quality Control in the CO3D Mission: A Critical Role, pages 547–552

Goel, S.

• Enhancing UWB Indoor Positioning using Bias-Aware EKF and Anchor Self-Localization, pages 375–382

Gong, J.

• A Tracking-Free Automatic Target Recognition (ATR) Radar Methodology for Real-Time Airspace Management in China’s Low-Altitude Economy, pages 505–511

Greco, R.

• Comparative Assessment of GeoAI-Based Frameworks for Automatic Urban Tree Cover Mapping, pages 449–455

Griess, V. C.

• Improving Tree Species Detection for Operational Forestry: The Role of Dataset Design, pages 413–420

Gstaiger, V.

• Integrating Advanced AI techniques to assist Urban Digital Twins Generation, pages 607–613

Gujski, L. M.

• A pipeline for automatic building reconstruction for Digital Twins in complex urban environments, pages 553–558

Guo, S.

• The Potential of HT-1 Spaceborne InSAR for Forest Vertical Structure Inversion, pages 225–230

Guo, Y.

• From Peaks to Crowns: A Morphology-Based UAV-LiDAR Framework for Individual Tree Segmentation, pages 429–434

Gutierrez Lopez, J.

• Meteorological Influence on L-Band Forest Backscatter: Evidence from the BorealScat-2 Radar Tower, pages 209–216

Gutjahr, K.

• Insights into the PAS Pana Stitching Algorithm, pages 103–112

H

Haala, N.

• An RTK-SLAM Dataset for Absolute Accuracy Evaluation in GNSS-Degraded Environments, pages 83–91

Hall Riaza, J.

• LiDAR-Camera Integration for High Precision Airborne Mapping, pages 323–331

Hasanpour Zaryabi, E.

• A Generative Upsampling Framework for Reconstructing High-Density Tree Structures from Low-Density Airborne Lidar, pages 435–442

He, Z.

• Relative Accuracy Evaluation of UAV Photogrammetry for Drifting Arctic Sea Ice, pages 247–254

Heap, C.

• Capturing, processing and analysing 3D Data in a National Mapping Agency, pages 483–488

Heipke, C.

• Zero-shot multi-class semantic segmentation of remote sensing images using SAM 2 with prior database information, pages 629–637

Henry, C.

• Integrating Advanced AI techniques to assist Urban Digital Twins Generation, pages 607–613

Henry, J.-B.

• The CO3D mission, a worldwide one-meter accuracy Digital Surface Model, pages 531–538

Hervouët, G.

• Enhancing hyperspectral VNIR spatial resolution on the coastal landscape: getting 63 bands at 3 m through the PRISMA VNIR and PlanetScope Dove-R fusion, pages 3–8

Hess, M.

• Integrating timber stability analysis for building life cycle management and HBIM framework support, pages 559–564

Hesse, M.

• Precision Increase for LiDAR-based Localisation using a predefined global Map, pages 161–166

Hirayama, S.

• Geometric performance of the small satellite CE-SAT-IE carrying an optical sensor derived from the COTS camera Canon EOS R5, pages 333–340

Holland, D.

• Capturing, processing and analysing 3D Data in a National Mapping Agency, pages 483–488

Hollaus, M.

• An Integrated Workflow for Urban Tree DBH Estimation from Handheld Mobile Laser Scanning (HMLS) Data, pages 33–40

Holst, C.

• Estimating laser scanner’s effective laser beam footprint using line spread function, pages 121–128
• Point-based, profile-based and 3D point cloud-based vibration monitoring of structures: comparisons based on a lab experiment, pages 513–522

Honkavaara, E.

• Aerial image quality control - spatial resolution, pages 489–495

Hopkinson, C.

• A Generative Upsampling Framework for Reconstructing High-Density Tree Structures from Low-Density Airborne Lidar, pages 435–442

Hsu, C.-C.

• An INS-Centric Locator for Autonomous Vehicles Aided by GNSS, Monocular Visual-Inertial Odometry, and HD Vector Maps, pages 361–368

Huang, C.-H.

• An INS-Centric Locator for Autonomous Vehicles Aided by GNSS, Monocular Visual-Inertial Odometry, and HD Vector Maps, pages 361–368

Huang, J.

• Hybrid Explicit–Implicit Dense Mapping with Quality-Guided Refinement and Residual Feedback, pages 389–396

Huang, Z.-X.

• Real-Time Mapping and Planning Intelligent Paths using Optical LiDAR and Quadruped Robot, pages 383–388

Hughes, R.

• Geometric and Visual SLAM: The accuracy of modern handheld LiDAR scanners, pages 193–200

Hung, C.-H.

• Real-Time Mapping and Planning Intelligent Paths using Optical LiDAR and Quadruped Robot, pages 383–388

Hyyppä, H.

• Combining and Processing Airborne Laser Scanning and Crowdsourced Terrestrial Images for Bilberry High-Yield Maps, pages 443–448

Hyyppä, J.

• Combining and Processing Airborne Laser Scanning and Crowdsourced Terrestrial Images for Bilberry High-Yield Maps, pages 443–448
• Linking TreeQSM with SAR and ALS to Detect Internal Canopy Allocation Shifts Across Scales, pages 457–464

Hyyppä, M.

• Combining and Processing Airborne Laser Scanning and Crowdsourced Terrestrial Images for Bilberry High-Yield Maps, pages 443–448

Hyyppä, S.

• Combining and Processing Airborne Laser Scanning and Crowdsourced Terrestrial Images for Bilberry High-Yield Maps, pages 443–448

Hyyti, H.

• Geometric and radiometric Calibration of a rotating multi-beam Lidar using a rotating tilted Platform, pages 255–261

I

Idesman, B.

• From BIM–SAR Fusion to API-Based Digital Twin Services for Building Deformation Monitoring, pages 583–588

Inojosa, D.

• Comparative Analysis of UAS Photogrammetric Accuracy: Influence of Flight Altitude on Accuracy and Operational Efficiency in Urban Mapping, pages 347–351

Iwaszczuk, D.

• Manual Annotations Meet Fine-Tuned Foundation Models: A Comparison on Tree Crown Segmentation Task, pages 599–605

J

Jaczewska, P.

• Integration of multi-source point clouds for bridge inventory – case study, pages 167–173

Jaeger, N.

• LiDAR-Camera Integration for High Precision Airborne Mapping, pages 323–331

Jangir, S. K.

• Integrating Advanced AI techniques to assist Urban Digital Twins Generation, pages 607–613

Jarząbek-Rychard, M.

• Single-image to model registration for semantic enrichment of indoor BIM, pages 575–581

Jenal, A.

• PanX.4: A Gyrocopter-Borne Six-Band VNIR Multicamera System for Sentinel-2-Aligned Multitemporal Vegetation Monitoring, pages 93–101

Jhan, J.-P.

• Dynamic Shadow Removal and Quality Assessment of High-Resolution Orthophotos for Pavement Inspection, pages 17–23
• UAV Visual Localization in GNSS-Denied Environments, pages 55–61
• Monocular ORB-SLAM3 Evaluation for Multi-Altitude VTOL UAV Mapping, pages 63–70

Jiang, W.

• Integration and Intelligent Monitoring Technology System of Space-Air-Ground Remote Sensing and Its Applications, pages 369–374

K

Kaartinen, H.

• Geometric and radiometric Calibration of a rotating multi-beam Lidar using a rotating tilted Platform, pages 255–261
• Combining and Processing Airborne Laser Scanning and Crowdsourced Terrestrial Images for Bilberry High-Yield Maps, pages 443–448

Karam, S.

• Manual Annotations Meet Fine-Tuned Foundation Models: A Comparison on Tree Crown Segmentation Task, pages 599–605

Karel, W.

• Comprehensive Evaluation of Small-Format Multi-Head Camera Systems for 3D Topographic Mapping, pages 239–246

Karila, K.

• Combining and Processing Airborne Laser Scanning and Crowdsourced Terrestrial Images for Bilberry High-Yield Maps, pages 443–448

Kempter, G.

• Integrating timber stability analysis for building life cycle management and HBIM framework support, pages 559–564

Kersten, T. P.

• Geometrical Accuracy Investigations of Handheld 3D Scanners in Comparison: Low-Cost vs. High-End, pages 263–270

Kivimäki, A.

• Combining and Processing Airborne Laser Scanning and Crowdsourced Terrestrial Images for Bilberry High-Yield Maps, pages 443–448

Knopf, P.

• Evaluation and performance assessment of a novel UAV-borne laser scanner system, pages 289–297

Kolling, M.

• Experimental Assessment of Measurement Uncertainty for a Green-Wavelength LiDAR System, pages 175–183

Korpelainen, T.

• Linking TreeQSM with SAR and ALS to Detect Internal Canopy Allocation Shifts Across Scales, pages 457–464

Krauß, T.

• Integrating Advanced AI techniques to assist Urban Digital Twins Generation, pages 607–613

Krisztian, L.

• PanX.4: A Gyrocopter-Borne Six-Band VNIR Multicamera System for Sentinel-2-Aligned Multitemporal Vegetation Monitoring, pages 93–101

Kröber, F.

• PanX.4: A Gyrocopter-Borne Six-Band VNIR Multicamera System for Sentinel-2-Aligned Multitemporal Vegetation Monitoring, pages 93–101

Kukko, A.

• Combining and Processing Airborne Laser Scanning and Crowdsourced Terrestrial Images for Bilberry High-Yield Maps, pages 443–448

Kurz, F.

• Integrating Advanced AI techniques to assist Urban Digital Twins Generation, pages 607–613

L

L'Helguen, C.

• CNES CO3D Image Ground Segment, pages 539–545

Ladstädter, R.

• Insights into the PAS Pana Stitching Algorithm, pages 103–112

Lahn, F.

• From BIM–SAR Fusion to API-Based Digital Twin Services for Building Deformation Monitoring, pages 583–588

Lallement, D.

• 3D Product Quality Control in the CO3D Mission: A Critical Role, pages 547–552

Lan, Y.

• Experimental Assessment of Measurement Uncertainty for a Green-Wavelength LiDAR System, pages 175–183

Larouche, C.

• Simultaneous Calibration of Boresight and Lever Arm for Mobile LiDAR Systems on Hydrographic Platforms Using Synthetic and Real Data, pages 307–313

Latourte, A.

• Line of Sight Calibration for Satellite Imagery Based on Matrix Detector, pages 271–278
• CO3D Image Quality Calibration, pages 523–530

Latry, C.

• Radiometric features and ground processing for high-resolution Earth observation satellite Bayer matrix-based images like CO3D, pages 353–360

Laudon, H.

• Meteorological Influence on L-Band Forest Backscatter: Evidence from the BorealScat-2 Radar Tower, pages 209–216

Laurent, G.

• Line of Sight Calibration for Satellite Imagery Based on Matrix Detector, pages 271–278

Lavric, I.

• An Integrated Workflow for Urban Tree DBH Estimation from Handheld Mobile Laser Scanning (HMLS) Data, pages 33–40

Lebegue, L.

• 3D Product Quality Control in the CO3D Mission: A Critical Role, pages 547–552

Lebègue, L.

• CO3D Image Quality Calibration, pages 523–530
• The CO3D mission, a worldwide one-meter accuracy Digital Surface Model, pages 531–538

Lelle-Neumann, G.

• Assessing Trajectory Accuracy of the CHCNAV RS10 Handheld Laser Scanner, pages 129–136

Li, D.

• A Tracking-Free Automatic Target Recognition (ATR) Radar Methodology for Real-Time Airspace Management in China’s Low-Altitude Economy, pages 505–511

Li, H.

• From Peaks to Crowns: A Morphology-Based UAV-LiDAR Framework for Individual Tree Segmentation, pages 429–434

Li, X.

• Integration and Intelligent Monitoring Technology System of Space-Air-Ground Remote Sensing and Its Applications, pages 369–374

Li, Y.-C.

• Dynamic Shadow Removal and Quality Assessment of High-Resolution Orthophotos for Pavement Inspection, pages 17–23

Lichti, D.

• Estimating laser scanner’s effective laser beam footprint using line spread function, pages 121–128

Lin, X.

• Hybrid Explicit–Implicit Dense Mapping with Quality-Guided Refinement and Residual Feedback, pages 389–396

Lippmann, P. L.

• Zero-shot multi-class semantic segmentation of remote sensing images using SAM 2 with prior database information, pages 629–637

Lisec, A.

• Towards a National Geospatial Digital Twin in Slovenia: Multi-Source Integration and a Flood Pilot for Hazard Management, pages 465–471

Liu, K.

• Integration and Intelligent Monitoring Technology System of Space-Air-Ground Remote Sensing and Its Applications, pages 369–374

Liu, L.

• Integration and Intelligent Monitoring Technology System of Space-Air-Ground Remote Sensing and Its Applications, pages 369–374

Liu, X.

• Denoising microwave interferometry data for high-Rise buildings with CEEMDAN energy-Correlation dual Criteria, pages 217–224

Liu, Z.

• Hybrid Explicit–Implicit Dense Mapping with Quality-Guided Refinement and Residual Feedback, pages 389–396

Loghin, A.-M.

• Comprehensive Evaluation of Small-Format Multi-Head Camera Systems for 3D Topographic Mapping, pages 239–246
• Evaluation of the IGN FLAIR-HUB Model Transferability Performance for Land Cover Mapping in Iasi, Romania, pages 589–597

Lou, Y.

• A Multi-Strategy Adaptive Error Modeling and Compensation Method for Star Point Centroid Extraction, pages 279–287

Lu, L.

• The Potential of HT-1 Spaceborne InSAR for Forest Vertical Structure Inversion, pages 225–230

Lu, Z.

• Denoising microwave interferometry data for high-Rise buildings with CEEMDAN energy-Correlation dual Criteria, pages 217–224

Lucas, S.

• Radiometric features and ground processing for high-resolution Earth observation satellite Bayer matrix-based images like CO3D, pages 353–360
• CO3D Image Quality Calibration, pages 523–530

Luhmann, T.

• Integrating timber stability analysis for building life cycle management and HBIM framework support, pages 559–564

Luitot, C.

• CO3D Image Quality Calibration, pages 523–530

Luo, Z.

• Integration and Intelligent Monitoring Technology System of Space-Air-Ground Remote Sensing and Its Applications, pages 369–374

Luoma, V.

• Combining and Processing Airborne Laser Scanning and Crowdsourced Terrestrial Images for Bilberry High-Yield Maps, pages 443–448

M

Ma, Q.

• From Peaks to Crowns: A Morphology-Based UAV-LiDAR Framework for Individual Tree Segmentation, pages 429–434

Maanpää, J.

• Combining and Processing Airborne Laser Scanning and Crowdsourced Terrestrial Images for Bilberry High-Yield Maps, pages 443–448

Macek, A.

• The concept of metrological validation of active measurement sensors - CENAGIS-MET, pages 299–306

Mahdianpari, M.

• A Self-Supervised Learning Framework for Methane Emission Detection Using Sentinel-2, pages 397–404
• A Geo-Foundation Framework for Retrogressive Thaw Slump Detection Using High-resolution Remote Sensing Data, pages 639–645

Mainardi, A. G.

• Mitigating trajectory drift in tunnel mapping: evaluation of conventional and novel approaches applied to SLAM-based mobile mapping solution, pages 25–32

Maiwald, F.

• Assessing Trajectory Accuracy of the CHCNAV RS10 Handheld Laser Scanner, pages 129–136

Males, G.-C.

• An Integrated Workflow for Urban Tree DBH Estimation from Handheld Mobile Laser Scanning (HMLS) Data, pages 33–40

Mandlburger, G.

• Evaluation and performance assessment of a novel UAV-borne laser scanner system, pages 289–297

Marjani, M.

• A Self-Supervised Learning Framework for Methane Emission Detection Using Sentinel-2, pages 397–404
• A Geo-Foundation Framework for Retrogressive Thaw Slump Detection Using High-resolution Remote Sensing Data, pages 639–645

Markelin, L.

• Aerial image quality control - spatial resolution, pages 489–495

Markiewicz, J.

• The concept of metrological validation of active measurement sensors - CENAGIS-MET, pages 299–306

Marmaglio, S.

• Mitigating trajectory drift in tunnel mapping: evaluation of conventional and novel approaches applied to SLAM-based mobile mapping solution, pages 25–32

Marsmann, M.

• Geometrical Accuracy Investigations of Handheld 3D Scanners in Comparison: Low-Cost vs. High-End, pages 263–270

Masiero, A.

• UAV-Assisted Collaborative Positioning in GNSS-Denied Environments, pages 41–48

Matias, E.

• Comparative Analysis of UAS Photogrammetric Accuracy: Influence of Flight Altitude on Accuracy and Operational Efficiency in Urban Mapping, pages 347–351

Matikainen, L.

• Combining and Processing Airborne Laser Scanning and Crowdsourced Terrestrial Images for Bilberry High-Yield Maps, pages 443–448

McManus, J.

• Simultaneous Calibration of Boresight and Lever Arm for Mobile LiDAR Systems on Hydrographic Platforms Using Synthetic and Real Data, pages 307–313

Megahed, Y.

• A Data-Driven Framework for Structural Crack Identification in 3D Mobile LiDAR Scans Using Deep Learning Classification Models, pages 185–192

Meißner, H.

• Aerial image quality control - spatial resolution, pages 489–495

Melet, O.

• The CO3D mission, a worldwide one-meter accuracy Digital Surface Model, pages 531–538
• CNES CO3D Image Ground Segment, pages 539–545

Meshkini, K.

• Improving Tree Species Detection for Operational Forestry: The Role of Dataset Design, pages 413–420

Metz, M.

• PanX.4: A Gyrocopter-Borne Six-Band VNIR Multicamera System for Sentinel-2-Aligned Multitemporal Vegetation Monitoring, pages 93–101

Miguéns, J.

• From BIM–SAR Fusion to API-Based Digital Twin Services for Building Deformation Monitoring, pages 583–588

Mohammadimanesh, F.

• A Self-Supervised Learning Framework for Methane Emission Detection Using Sentinel-2, pages 397–404
• A Geo-Foundation Framework for Retrogressive Thaw Slump Detection Using High-resolution Remote Sensing Data, pages 639–645

Monteith, A. R.

• Meteorological Influence on L-Band Forest Backscatter: Evidence from the BorealScat-2 Radar Tower, pages 209–216

Morelli, L.

• UAV-Assisted Collaborative Positioning in GNSS-Denied Environments, pages 41–48

Morin-Bernard, A.

• Updating Forestry Road networks in Ontario Using Single Photon LiDAR and Deep Learning-enhanced algorithms, pages 421–427

Mostafa, M.

• LiDAR-Camera Integration for High Precision Airborne Mapping, pages 323–331

Muick, M.

• LiDAR-Camera Integration for High Precision Airborne Mapping, pages 323–331

Mutreja, G.

• Integrating Advanced AI techniques to assist Urban Digital Twins Generation, pages 607–613

Mäki-Leppilampi, M.

• Geometric and radiometric Calibration of a rotating multi-beam Lidar using a rotating tilted Platform, pages 255–261

N

Neuner, H.-B.

• Point-based, profile-based and 3D point cloud-based vibration monitoring of structures: comparisons based on a lab experiment, pages 513–522

Nogue, L.

• Enhancing hyperspectral VNIR spatial resolution on the coastal landscape: getting 63 bands at 3 m through the PRISMA VNIR and PlanetScope Dove-R fusion, pages 3–8

Näsi, R.

• Combining and Processing Airborne Laser Scanning and Crowdsourced Terrestrial Images for Bilberry High-Yield Maps, pages 443–448

Nüchter, A.

• Precision Increase for LiDAR-based Localisation using a predefined global Map, pages 161–166

O

Ohgushi, F.

• Geometric performance of the small satellite CE-SAT-IE carrying an optical sensor derived from the COTS camera Canon EOS R5, pages 333–340

Olteanu-Raimond, A.-M.

• Evaluation of the IGN FLAIR-HUB Model Transferability Performance for Land Cover Mapping in Iasi, Romania, pages 589–597

Oniga, V.-E.

• An Integrated Workflow for Urban Tree DBH Estimation from Handheld Mobile Laser Scanning (HMLS) Data, pages 33–40
• Comprehensive Evaluation of Small-Format Multi-Head Camera Systems for 3D Topographic Mapping, pages 239–246
• Evaluation of the IGN FLAIR-HUB Model Transferability Performance for Land Cover Mapping in Iasi, Romania, pages 589–597

Ostrowski, W.

• Evaluating RTK GNSS-Assisted Close-Range Photogrammetry for Cultural Heritage Applications without GCPs, pages 315–321

Oveland, I.

• Aerial image quality control - spatial resolution, pages 489–495

Oštir, K.

• Towards a National Geospatial Digital Twin in Slovenia: Multi-Source Integration and a Flood Pilot for Hazard Management, pages 465–471

P

Paffenholz, J.-A.

• Experimental Assessment of Measurement Uncertainty for a Green-Wavelength LiDAR System, pages 175–183

Palaz, S.

• Estimating laser scanner’s effective laser beam footprint using line spread function, pages 121–128

Pan, J.

• Integrating timber stability analysis for building life cycle management and HBIM framework support, pages 559–564

Partanen, B.

• Combining and Processing Airborne Laser Scanning and Crowdsourced Terrestrial Images for Bilberry High-Yield Maps, pages 443–448

Pasternak, K.

• Integration of multi-source point clouds for bridge inventory – case study, pages 167–173

Perfetti, L.

• Mitigating trajectory drift in tunnel mapping: evaluation of conventional and novel approaches applied to SLAM-based mobile mapping solution, pages 25–32

Perko, R.

• Insights into the PAS Pana Stitching Algorithm, pages 103–112

Persson, H. J.

• Meteorological Influence on L-Band Forest Backscatter: Evidence from the BorealScat-2 Radar Tower, pages 209–216

Pesaresi, S.

• UAV data fusion approach to assess vegetation recovery dynamics after pipeline construction, pages 405–412

Petrovic, B.

• UAV data fusion approach to assess vegetation recovery dynamics after pipeline construction, pages 405–412

Pfeifer, N.

• An Integrated Workflow for Urban Tree DBH Estimation from Handheld Mobile Laser Scanning (HMLS) Data, pages 33–40
• Comprehensive Evaluation of Small-Format Multi-Head Camera Systems for 3D Topographic Mapping, pages 239–246

Pianetti, M.

• Comparative Assessment of GeoAI-Based Frameworks for Automatic Urban Tree Cover Mapping, pages 449–455

Pierdicca, R.

• UAV data fusion approach to assess vegetation recovery dynamics after pipeline construction, pages 405–412
• Multi-Source Remote Sensing for Maritime Security: A Performance Evaluation of SAR and RGB Imagery for Small-Scale Fishing Vessel Detection, pages 621–628

Pirotti, F.

• Comparative Assessment of GeoAI-Based Frameworks for Automatic Urban Tree Cover Mapping, pages 449–455

Potočnik Buhvald, A.

• Towards a National Geospatial Digital Twin in Slovenia: Multi-Source Integration and a Flood Pilot for Hazard Management, pages 465–471

Pradines, L.

• CNES CO3D Image Ground Segment, pages 539–545

Prebensen Korsnes, A.

• Aerial image quality control - spatial resolution, pages 489–495

Przybilla, H.-J.

• Geometrical Accuracy Investigations of Handheld 3D Scanners in Comparison: Low-Cost vs. High-End, pages 263–270

Puttonen, E.

• Combining and Processing Airborne Laser Scanning and Crowdsourced Terrestrial Images for Bilberry High-Yield Maps, pages 443–448
• Linking TreeQSM with SAR and ALS to Detect Internal Canopy Allocation Shifts Across Scales, pages 457–464

Q

Qu, F.

• MRGF: A robust SLAM Framework based on Millimeter wave Radar and GNSS Fusion in Harsh Environments, pages 647–653

Quaglia, D.

• Comparative Assessment of GeoAI-Based Frameworks for Automatic Urban Tree Cover Mapping, pages 449–455

Quattrini, G.

• UAV data fusion approach to assess vegetation recovery dynamics after pipeline construction, pages 405–412

R

Ravindran, R.

• Manual Annotations Meet Fine-Tuned Foundation Models: A Comparison on Tree Crown Segmentation Task, pages 599–605

Rawat, S.

• Meteorological Influence on L-Band Forest Backscatter: Evidence from the BorealScat-2 Radar Tower, pages 209–216

Reiterer, A.

• Experimental Assessment of Measurement Uncertainty for a Green-Wavelength LiDAR System, pages 175–183

Remondino, F.

• UAV-Assisted Collaborative Positioning in GNSS-Denied Environments, pages 41–48
• Combining and Processing Airborne Laser Scanning and Crowdsourced Terrestrial Images for Bilberry High-Yield Maps, pages 443–448

Ress, V.

• An RTK-SLAM Dataset for Absolute Accuracy Evaluation in GNSS-Degraded Environments, pages 83–91

Riegler, E.

• Insights into the PAS Pana Stitching Algorithm, pages 103–112

Rodrigues Júnior, J.

• Comparative Analysis of UAS Photogrammetric Accuracy: Influence of Flight Altitude on Accuracy and Operational Efficiency in Urban Mapping, pages 347–351

Rosa, V.

• Point-based, profile-based and 3D point cloud-based vibration monitoring of structures: comparisons based on a lab experiment, pages 513–522

Roscher, R.

• PanX.4: A Gyrocopter-Borne Six-Band VNIR Multicamera System for Sentinel-2-Aligned Multitemporal Vegetation Monitoring, pages 93–101

Rothenbühler, P.

• Geometric and Visual SLAM: The accuracy of modern handheld LiDAR scanners, pages 193–200

Rottensteiner, F.

• Zero-shot multi-class semantic segmentation of remote sensing images using SAM 2 with prior database information, pages 629–637

Rusu, B.

• Evaluation of the IGN FLAIR-HUB Model Transferability Performance for Land Cover Mapping in Iasi, Romania, pages 589–597

Rünger, C.

• Assessing Trajectory Accuracy of the CHCNAV RS10 Handheld Laser Scanner, pages 129–136

S

Saarinen, O.

• Combining and Processing Airborne Laser Scanning and Crowdsourced Terrestrial Images for Bilberry High-Yield Maps, pages 443–448

Salgueiro Simon, M.

• Enhancing hyperspectral VNIR spatial resolution on the coastal landscape: getting 63 bands at 3 m through the PRISMA VNIR and PlanetScope Dove-R fusion, pages 3–8

Sanità, M.

• Multi-Source Remote Sensing for Maritime Security: A Performance Evaluation of SAR and RGB Imagery for Small-Scale Fishing Vessel Detection, pages 621–628

Sato, S.

• Comparative Analysis of UAS Photogrammetric Accuracy: Influence of Flight Altitude on Accuracy and Operational Efficiency in Urban Mapping, pages 347–351

Scaioni, M.

• Evaluation of TLS and PMLS Sensors for Cultural Heritage Documentation and HBIM Modelling: The Case Study of San Giacomo Church in Como, Italy, pages 151–159

Schachinger, B.

• LiDAR-Camera Integration for High Precision Airborne Mapping, pages 323–331

Schillinger, M.

• Radiometric features and ground processing for high-resolution Earth observation satellite Bayer matrix-based images like CO3D, pages 353–360
• CO3D Image Quality Calibration, pages 523–530

Scolamiero, V.

• Developing an Urban Road Dataset: A Multi-Sensor Framework for DT and AI-Based Road Infrastructure Management, pages 565–573

Sebari, I.

• The Use of Geospatial Artificial Intelligence Technologies (GeoAI) within National Mapping Agencies: A Review, pages 473–482

Senousi, A. M.

• Design and Development of a Livox-Based Indoor Surveying System for Floor Mapping Applications, pages 145–150

Shahraji, M. H.

• Simultaneous Calibration of Boresight and Lever Arm for Mobile LiDAR Systems on Hydrographic Platforms Using Synthetic and Real Data, pages 307–313

Shaker, A.

• A Data-Driven Framework for Structural Crack Identification in 3D Mobile LiDAR Scans Using Deep Learning Classification Models, pages 185–192

Sippel, E. M.

• Real-Time Visualization of Cadastral Information from German Authorities Using Augmented Reality, pages 497–503

Skuddis, D.

• An RTK-SLAM Dataset for Absolute Accuracy Evaluation in GNSS-Degraded Environments, pages 83–91

Soergel, U.

• An RTK-SLAM Dataset for Absolute Accuracy Evaluation in GNSS-Degraded Environments, pages 83–91

Sorokina, H.

• Linking TreeQSM with SAR and ALS to Detect Internal Canopy Allocation Shifts Across Scales, pages 457–464

Steier, J.

• Manual Annotations Meet Fine-Tuned Foundation Models: A Comparison on Tree Crown Segmentation Task, pages 599–605

Stemmler, C.

• From BIM–SAR Fusion to API-Based Digital Twin Services for Building Deformation Monitoring, pages 583–588

Stoian, C.

• Evaluation of the IGN FLAIR-HUB Model Transferability Performance for Land Cover Mapping in Iasi, Romania, pages 589–597

Strecha, C.

• Geometric and Visual SLAM: The accuracy of modern handheld LiDAR scanners, pages 193–200

Su, H.

• From Peaks to Crowns: A Morphology-Based UAV-LiDAR Framework for Individual Tree Segmentation, pages 429–434

Sun, H.

• From Peaks to Crowns: A Morphology-Based UAV-LiDAR Framework for Individual Tree Segmentation, pages 429–434

Sun, J. Q.

• A Generative Upsampling Framework for Reconstructing High-Density Tree Structures from Low-Density Airborne Lidar, pages 435–442

Süleymanoglu, B.

• Vehicle-Based Mobile Mapping Test Platform: Direct Georeferencing and TLS-Based Accuracy Assessment, pages 49–54

T

Tadono, T.

• Geometric performance of the small satellite CE-SAT-IE carrying an optical sensor derived from the COTS camera Canon EOS R5, pages 333–340

Taher, J.

• Combining and Processing Airborne Laser Scanning and Crowdsourced Terrestrial Images for Bilberry High-Yield Maps, pages 443–448

Takahashi, Y.

• Range Error Detection and Evaluation for retroreflective Road Signs in Phase-Shift MMS Point Clouds, pages 9–15

Takaku, J.

• Geometric performance of the small satellite CE-SAT-IE carrying an optical sensor derived from the COTS camera Canon EOS R5, pages 333–340

Takhtkeshha, N.

• Combining and Processing Airborne Laser Scanning and Crowdsourced Terrestrial Images for Bilberry High-Yield Maps, pages 443–448

Tamimi, R.

• Vehicle-Based Mobile Mapping Test Platform: Direct Georeferencing and TLS-Based Accuracy Assessment, pages 49–54
• Calibration and Georeferencing for GNSS-Equipped Vehicle Video Mapping Using a Tesla Model Y, pages 341–345

Tang, R.-S.

• UAV Visual Localization in GNSS-Denied Environments, pages 55–61
• Monocular ORB-SLAM3 Evaluation for Multi-Altitude VTOL UAV Mapping, pages 63–70

Tang, X.

• Preface: Technical Commission I (Sensor Systems) – ISPRS Archives, pages 1–1
• Integration and Intelligent Monitoring Technology System of Space-Air-Ground Remote Sensing and Its Applications, pages 369–374

Tang, Y.

• MRGF: A robust SLAM Framework based on Millimeter wave Radar and GNSS Fusion in Harsh Environments, pages 647–653
• Urban-Graph: Bridging Local SLAM and Global Earth Observation for Fine-Grained Urban LCLU Mapping, pages 615–620

Tanguy, Y.

• CO3D Image Quality Calibration, pages 523–530
• 3D Product Quality Control in the CO3D Mission: A Critical Role, pages 547–552

Tassetti, A. N.

• Multi-Source Remote Sensing for Maritime Security: A Performance Evaluation of SAR and RGB Imagery for Small-Scale Fishing Vessel Detection, pages 621–628

Tekavec, J.

• Towards a National Geospatial Digital Twin in Slovenia: Multi-Source Integration and a Flood Pilot for Hazard Management, pages 465–471

Thomas, C.

• Radiometric features and ground processing for high-resolution Earth observation satellite Bayer matrix-based images like CO3D, pages 353–360
• CO3D Image Quality Calibration, pages 523–530

Tian, J.

• Integrating Advanced AI techniques to assist Urban Digital Twins Generation, pages 607–613

Todmal, S.

• Enhancing UWB Indoor Positioning using Bias-Aware EKF and Anchor Self-Localization, pages 375–382

Tommaselli, A. M. G.

• Preface: Technical Commission I (Sensor Systems) – ISPRS Archives, pages 1–1

Toth, C.

• UAV-Assisted Collaborative Positioning in GNSS-Denied Environments, pages 41–48
• Vehicle-Based Mobile Mapping Test Platform: Direct Georeferencing and TLS-Based Accuracy Assessment, pages 49–54
• Calibration and Georeferencing for GNSS-Equipped Vehicle Video Mapping Using a Tesla Model Y, pages 341–345

Trybala, P.

• UAV-Assisted Collaborative Positioning in GNSS-Denied Environments, pages 41–48

Tsai, M.-L.

• An INS-Centric Locator for Autonomous Vehicles Aided by GNSS, Monocular Visual-Inertial Odometry, and HD Vector Maps, pages 361–368

Tsai, S.

• An INS-Centric Locator for Autonomous Vehicles Aided by GNSS, Monocular Visual-Inertial Odometry, and HD Vector Maps, pages 361–368

Tsou, L.-H.

• UAV Visual Localization in GNSS-Denied Environments, pages 55–61

Turtiainen, M.

• Combining and Processing Airborne Laser Scanning and Crowdsourced Terrestrial Images for Bilberry High-Yield Maps, pages 443–448

U

Ulander, L. M. H.

• Meteorological Influence on L-Band Forest Backscatter: Evidence from the BorealScat-2 Radar Tower, pages 209–216

V

Vaaja, M.

• Combining and Processing Airborne Laser Scanning and Crowdsourced Terrestrial Images for Bilberry High-Yield Maps, pages 443–448

Vassena, G. P. M.

• Mitigating trajectory drift in tunnel mapping: evaluation of conventional and novel approaches applied to SLAM-based mobile mapping solution, pages 25–32

Vastaranta, M.

• Combining and Processing Airborne Laser Scanning and Crowdsourced Terrestrial Images for Bilberry High-Yield Maps, pages 443–448

Vidal, B.

• Line of Sight Calibration for Satellite Imagery Based on Matrix Detector, pages 271–278

Vidiček, A.

• Towards a National Geospatial Digital Twin in Slovenia: Multi-Source Integration and a Flood Pilot for Hazard Management, pages 465–471

W

Wang, C.

• Loose Coupling Modeling of LiDAR-based Localization and SLAM, pages 201–207
• Urban-Graph: Bridging Local SLAM and Global Earth Observation for Fine-Grained Urban LCLU Mapping, pages 615–620

Wang, J.

• Experimental Assessment of Measurement Uncertainty for a Green-Wavelength LiDAR System, pages 175–183

Wang, M.

• A Multi-Strategy Adaptive Error Modeling and Compensation Method for Star Point Centroid Extraction, pages 279–287

Wang, R.

• Denoising microwave interferometry data for high-Rise buildings with CEEMDAN energy-Correlation dual Criteria, pages 217–224

Wang, T.-C.

• UAV Visual Localization in GNSS-Denied Environments, pages 55–61

Wang, W.

• Hybrid Explicit–Implicit Dense Mapping with Quality-Guided Refinement and Residual Feedback, pages 389–396

Wang, Y.

• MWIR–Visible Dual-Channel Airborne Imaging integration for High-Resolution Urban Mapping, pages 113–120
• Linking TreeQSM with SAR and ALS to Detect Internal Canopy Allocation Shifts Across Scales, pages 457–464

Wei, X.

• MRGF: A robust SLAM Framework based on Millimeter wave Radar and GNSS Fusion in Harsh Environments, pages 647–653

Weishaupt, M.

• Integrating Advanced AI techniques to assist Urban Digital Twins Generation, pages 607–613

Wen, C.

• Loose Coupling Modeling of LiDAR-based Localization and SLAM, pages 201–207

Werner, C.

• Experimental Assessment of Measurement Uncertainty for a Green-Wavelength LiDAR System, pages 175–183

Wichmann, A.

• Real-Time Visualization of Cadastral Information from German Authorities Using Augmented Reality, pages 497–503

Wiśniewski, M.

• The concept of metrological validation of active measurement sensors - CENAGIS-MET, pages 299–306

Wolf, N.

• From BIM–SAR Fusion to API-Based Digital Twin Services for Building Deformation Monitoring, pages 583–588

Wu, H.

• Denoising microwave interferometry data for high-Rise buildings with CEEMDAN energy-Correlation dual Criteria, pages 217–224

Wu, X.

• Urban-Graph: Bridging Local SLAM and Global Earth Observation for Fine-Grained Urban LCLU Mapping, pages 615–620

Węzka, K.

• Evaluating RTK GNSS-Assisted Close-Range Photogrammetry for Cultural Heritage Applications without GCPs, pages 315–321

Włodarczyk, D.

• Single-image to model registration for semantic enrichment of indoor BIM, pages 575–581

X

Xia, Z.

• Improving Tree Species Detection for Operational Forestry: The Role of Dataset Design, pages 413–420

Xie, H.

• CMLGF-LIO: A Cross-Modal Local-Global Fusion Framework for Robust LiDAR-Inertial Odometry, pages 71–76

Xu, T.

• From Peaks to Crowns: A Morphology-Based UAV-LiDAR Framework for Individual Tree Segmentation, pages 429–434

Y

Yan, J.

• A Tracking-Free Automatic Target Recognition (ATR) Radar Methodology for Real-Time Airspace Management in China’s Low-Altitude Economy, pages 505–511

Yan, L.

• CMLGF-LIO: A Cross-Modal Local-Global Fusion Framework for Robust LiDAR-Inertial Odometry, pages 71–76

Yan, Y.

• Hybrid Explicit–Implicit Dense Mapping with Quality-Guided Refinement and Residual Feedback, pages 389–396

Yang, C.-H.

• From BIM–SAR Fusion to API-Based Digital Twin Services for Building Deformation Monitoring, pages 583–588

Yang, D.

• Relative Accuracy Evaluation of UAV Photogrammetry for Drifting Arctic Sea Ice, pages 247–254

Yang, J.

• Experimental Assessment of Measurement Uncertainty for a Green-Wavelength LiDAR System, pages 175–183

Yang, M.-J.

• Monocular ORB-SLAM3 Evaluation for Multi-Altitude VTOL UAV Mapping, pages 63–70

Yang, R.

• The Potential of HT-1 Spaceborne InSAR for Forest Vertical Structure Inversion, pages 225–230

Yang, X.

• CMLGF-LIO: A Cross-Modal Local-Global Fusion Framework for Robust LiDAR-Inertial Odometry, pages 71–76

Yang, Y.

• Evaluation of VGGT with ALS Point Clouds for Large-Scale Dense Mapping, pages 77–82
• Estimating laser scanner’s effective laser beam footprint using line spread function, pages 121–128

Ye, J.

• The Potential of HT-1 Spaceborne InSAR for Forest Vertical Structure Inversion, pages 225–230

You, S.

• Integration and Intelligent Monitoring Technology System of Space-Air-Ground Remote Sensing and Its Applications, pages 369–374

Youssefi, D.

• CO3D Image Quality Calibration, pages 523–530
• The CO3D mission, a worldwide one-meter accuracy Digital Surface Model, pages 531–538
• CNES CO3D Image Ground Segment, pages 539–545
• 3D Product Quality Control in the CO3D Mission: A Critical Role, pages 547–552

Yu, M.

• Urban-Graph: Bridging Local SLAM and Global Earth Observation for Fine-Grained Urban LCLU Mapping, pages 615–620

Yu, X.

• Combining and Processing Airborne Laser Scanning and Crowdsourced Terrestrial Images for Bilberry High-Yield Maps, pages 443–448

Yuan, J.

• From Peaks to Crowns: A Morphology-Based UAV-LiDAR Framework for Individual Tree Segmentation, pages 429–434

Yuan, R.

• Hybrid Explicit–Implicit Dense Mapping with Quality-Guided Refinement and Residual Feedback, pages 389–396

Z

Zhang, H.

• Loose Coupling Modeling of LiDAR-based Localization and SLAM, pages 201–207
• The Potential of HT-1 Spaceborne InSAR for Forest Vertical Structure Inversion, pages 225–230
• A Multi-Strategy Adaptive Error Modeling and Compensation Method for Star Point Centroid Extraction, pages 279–287
• A Multi-Strategy Adaptive Error Modeling and Compensation Method for Star Point Centroid Extraction, pages 279–287
• Hybrid Explicit–Implicit Dense Mapping with Quality-Guided Refinement and Residual Feedback, pages 389–396

Zhang, S.

• Relative Accuracy Evaluation of UAV Photogrammetry for Drifting Arctic Sea Ice, pages 247–254

Zhang, T.

• Preface: Technical Commission I (Sensor Systems) – ISPRS Archives, pages 1–1

Zhang, W.

• An RTK-SLAM Dataset for Absolute Accuracy Evaluation in GNSS-Degraded Environments, pages 83–91
• Relative Accuracy Evaluation of UAV Photogrammetry for Drifting Arctic Sea Ice, pages 247–254

Zhang, X.

• The Potential of HT-1 Spaceborne InSAR for Forest Vertical Structure Inversion, pages 225–230

Zhang, Y.

• Denoising microwave interferometry data for high-Rise buildings with CEEMDAN energy-Correlation dual Criteria, pages 217–224
• MRGF: A robust SLAM Framework based on Millimeter wave Radar and GNSS Fusion in Harsh Environments, pages 647–653

Zhao, L.

• Hybrid Explicit–Implicit Dense Mapping with Quality-Guided Refinement and Residual Feedback, pages 389–396

Zhao, S.

• Denoising microwave interferometry data for high-Rise buildings with CEEMDAN energy-Correlation dual Criteria, pages 217–224

Zhou, J.

• MRGF: A robust SLAM Framework based on Millimeter wave Radar and GNSS Fusion in Harsh Environments, pages 647–653
• Urban-Graph: Bridging Local SLAM and Global Earth Observation for Fine-Grained Urban LCLU Mapping, pages 615–620

Zhou, T.

• A Multi-Strategy Adaptive Error Modeling and Compensation Method for Star Point Centroid Extraction, pages 279–287

Ö

Ötsch, E.

• Evaluation and performance assessment of a novel UAV-borne laser scanner system, pages 289–297

Č

Črnigoj, N.

• Towards a National Geospatial Digital Twin in Slovenia: Multi-Source Integration and a Flood Pilot for Hazard Management, pages 465–471

Ł

Łapiński, S.

• The concept of metrological validation of active measurement sensors - CENAGIS-MET, pages 299–306

Š

Šušteršič, K.

• Towards a National Geospatial Digital Twin in Slovenia: Multi-Source Integration and a Flood Pilot for Hazard Management, pages 465–471

Ž

Žnidaršič, A.

• Towards a National Geospatial Digital Twin in Slovenia: Multi-Source Integration and a Flood Pilot for Hazard Management, pages 465–471