This article studies the complementary usage of RTI and SfM-MVS visual inspection (visual testing) of welds under water. Two compact low-cost lighting domes of different designs were developed and deployed with a monochromatic camera at close range. The lighting domes generate homogenous and direct illumination, respectively, tailoring the requirements of SfM and RTI. The camera is housed in a cylindrical tube, equipped with a dome port interface. The 3D reconstruction in combination with RTI models could augment existing testing strategies and provide digital, gapless documentation. Experiments were conducted in laboratory in air, clear and turbid water questioning were the capabilities and limits are for given setup with respect to visual testing of welds. Under the correct lightning, in air the techniques perform on a high accuracy level and are well suited for inspecting welds digital and interactively. Underwater the results differ in dependence of the degree of turbidity and prove to be sensitive for configurational parameters leaving space for improvements of acquisition and processing workflows. However, even in turbid water the 3D reconstructions and RTI models could be calculated enabling novel possibilities for weld inspection.