UAV-based photogrammetry: monitoring of a building zone

29 citations as recorded by crossref.

1. National-scale mapping of building height using Sentinel-1 and Sentinel-2 time series D. Frantz et al.
2. Automated building occupancy authorization using BIM and UAV-based spatial information: photogrammetric reverse engineering S. Lee et al.
3. Ground surface structure classification using UAV remote sensing images and machine learning algorithms C. Fan
4. Digital transformation of management of industrial enterprises: application of unmanned aerial vehicles I. Zaychenko et al.
5. Assessment of Positional Accuracy in Maps Derived Using UAV_PPK, UAV Network RTK, RTK-GNSS, and TUSAGA-Active Techniques E. Özdemir et al.
6. Internet Photogrammetry for Inspection of Seaports Z. Paszotta et al.
7. Fast, low cost and safe methodology for the assessment of the state of conservation of historical buildings from 3D laser scanning: The case study of Santa Maria in Portonovo (Italy) E. Quagliarini et al.
8. Structure from motion photogrammetry in physical geography M. Smith et al.
9. Accuracy Assessment of the Building Height Copernicus Data Layer: A Case Study of Bratislava, Slovakia D. Szatmári et al.
10. Detecting new building construction in urban areas based on images of small unmanned aerial system H. Ning et al.
11. Visual Inspection of Historical Buildings Using Micro UAV M. Kaamin et al.
12. Lightweight UAV digital elevation models and orthoimagery for environmental applications: data accuracy evaluation and potential for river flood risk modelling S. Coveney & K. Roberts
13. Assessing Impacts of Drone-Induced Distraction on Postural Stability of Roofers during Shingle Installation on Inclined Surfaces M. Mouri et al.
14. Digital transformation: the case of the application of drones in construction I. Zaychenko et al.
15. An Image-Based Approach for the Co-Registration of Multi-Temporal UAV Image Datasets I. Aicardi et al.
16. Visual Slope Inspection using Unmanned Aerial Vehicle (UAV) M. Kaamin et al.
17. Using 360-Degree Virtual Reality Technology for Training Construction Workers about Safety Challenges of Drones J. Cheng et al.
18. Trends, benefits, and barriers of unmanned aerial systems in the construction industry: a survey study in the United States G. Albeaino & M. Gheisari
19. Exploring the effect of human-drone communication modality on safety and balance control in virtual construction environments B. Hu et al.
20. Enhancement of Ecological Field Experimental Research by Means of UAV Multispectral Sensing R. Díaz-Delgado et al.
21. Using convolutional neural networks to identify illegal roofs from unmanned aerial vehicle images C. Fan
22. Multispectral UAV-based LULC mapping performance improvement by integrating precise NDSM data and machine learning algorithms I. Aydin & U. Sefercik
23. Proficient Calibration Methodologies for Fixed Photogrammetric Monitoring Systems D. Guccione et al.
24. Rapid Assessment of Ecological Integrity for LTER Wetland Sites by Using UAV Multispectral Mapping R. Díaz-Delgado et al.
25. Geometric Accuracy of 3D Reality Mesh Utilization for BIM-Based Earthwork Quantity Estimation Workflows P. Kavaliauskas et al.
26. Quality Assessment of DSMs Produced from UAV Flights Georeferenced with On-Board RTK Positioning G. Forlani et al.
27. Automated generation and semantic segmentation of roof orthophoto for digital twin -based monitoring of slated roofs J. Li et al.
28. DSM-based identification of changes in highly dynamic urban agglomerations G. Warth et al.
29. Optimal Self-Calibration Strategies in the Combined Bundle Adjustment of Aerial–Terrestrial Integrated Images L. Xie et al.