The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
Download
Publications Copernicus
Download
Citation
Articles | Volume XLI-B8
https://doi.org/10.5194/isprs-archives-XLI-B8-727-2016
https://doi.org/10.5194/isprs-archives-XLI-B8-727-2016
23 Jun 2016
 | 23 Jun 2016

WIDE-AREA MAPPING OF FOREST WITH NATIONAL AIRBORNE LASER SCANNING AND FIELD INVENTORY DATASETS

J.-M. Monnet, C. Ginzler, and J.-C. Clivaz

Keywords: Forest Inventory, Airborne Laser Scanning, Wide-area Mapping, Remote Sensing, Valais

Abstract. Airborne laser scanning (ALS) remote sensing data are now available for entire countries such as Switzerland. Methods for the estimation of forest parameters from ALS have been intensively investigated in the past years. However, the implementation of a forest mapping workflow based on available data at a regional level still remains challenging. A case study was implemented in the Canton of Valais (Switzerland). The national ALS dataset and field data of the Swiss National Forest Inventory were used to calibrate estimation models for mean and maximum height, basal area, stem density, mean diameter and stem volume. When stratification was performed based on ALS acquisition settings and geographical criteria, satisfactory prediction models were obtained for volume (R2 = 0.61 with a root mean square error of 47 %) and basal area (respectively 0.51 and 45 %) while height variables had an error lower than 19%. This case study shows that the use of nationwide ALS and field datasets for forest resources mapping is cost efficient, but additional investigations are required to handle the limitations of the input data and optimize the accuracy.