COMPARATIVE GEOMETRICAL ACCURACY INVESTIGATIONS OF HAND-HELD 3D SCANNING SYSTEMS – AN UPDATE

17 citations as recorded by crossref.

1. Coordinate-wise monotonic transformations enable privacy-preserving age estimation with 3D face point cloud X. Yang et al. 10.1007/s11427-023-2518-8
2. Comparative Analysis of Digital Models of Objects of Cultural Heritage Obtained by the “3D SLS” and “SfM” Methods M. Barszcz et al. 10.3390/app11125321
3. Toleranzfreie Montage modularer Betontragwerke J. Stindt et al. 10.1002/bate.202300052
4. Comparison of geometrical accuracy of active devices for 3D orthopaedic reconstructions D. Redaelli et al. 10.1007/s00170-021-06778-0
5. Construction of low-cost 3D scanner using triangulation and Screened Poisson Surface Reconstruction techniques K. Saptaji et al. 10.1088/1757-899X/1098/6/062091
6. Evaluation of Geometric Data Registration of Small Objects from Non-Invasive Techniques: Applicability to the HBIM Field J. Moyano et al. 10.3390/s23031730
7. A Critical Comparison of 3D Digitization Techniques for Heritage Objects E. Adamopoulos et al. 10.3390/ijgi10010010
8. 3D Scanning of the Forearm for Orthosis and HMI Applications J. Perry et al. 10.3389/frobt.2021.576783
9. Reproducibility of 3D scanning in the periorbital region M. Hollander et al. 10.1038/s41598-021-83335-5
10. A Method for Rapid Self-Calibration of Wearable Soft Strain Sensors Y. Feng et al. 10.1109/JSEN.2021.3095875
11. Broken engine’s crankshaft misalignment inspection by using reverse engineering technique W. Khuanlieng et al. 10.5604/01.3001.0054.5685
12. Fertigungstoleranzen von Betonfertigteilen für die modulare Bauweise P. Forman & P. Mark 10.1002/best.202200007
13. Influence of head positioning during cone-beam CT imaging on the accuracy of virtual 3D models M. van Eijnatten et al. 10.1259/dmfr.20220104
14. Using automated vegetation cover estimation from close-range photogrammetric point clouds to compare vegetation location properties in mountain terrain R. Niederheiser et al. 10.1080/15481603.2020.1859264
15. Microgeophysics and geomatics data integration reveals the internal fracturing conditions of the statue of Ramses II (Museo Egizio, Torino, Italy) C. Colombero et al. 10.1038/s41598-022-14300-z
16. Copyright Protection of 3D Digitized Artistic Sculptures by Adding Unique Local Inconspicuous Errors by Sculptors I. Vasiljević et al. 10.3390/app11167481
17. Automatic Multiview Alignment of RGB-D Range Maps of Upper Limb Anatomy L. Di Angelo et al. 10.3390/s23187841