ASSIMILATING GEOSPATIAL METAMODEL AND INVENTORY MAPPING FOR NON-STRUCTURAL MITIGATION OF LANDSLIDE

Abstract. In Malaysia, issues related to disaster management are always given attention in society and by the responsible parties. However, in general, citizen do not think of the consequential impact of disaster due to less of knowledge regarding the early phase in disaster management. Therefore, citizen in those areas will be more vulnerable to landslide as the citizen face difficulties in identifying specific areas with the tendency of landslides. This paper presents a geospatial metamodel approach for non-structural mitigation of landslide using data from airborne LiDAR and aerial photograph. Disaster management metamodel with geospatial element combines activity for managing disaster along with geospatial database that makes it handy for appreciating the metamodel. On the other hand, the digital terrain model (DTM) from LiDAR and aerial photograph is required to produce landslide inventory mapping. The case study area is located in Kundasang, Sabah, where landslides occur frequently. In order to get better visual in identifying landslides in the study area, three types of data are required to carry out image interpretation. The three types of data are hillshade, topographic openness and colour composite. The result of the landslide inventory map shows that there are five types of landslide, which is debris flow, debris fall, mud flow, deep-seated landslide and shallow landslide. Finally, the result of landslide inventory map will be integrated into the developed metamodel for presentation to the users. This landslide inventory map is used as a non-structural mitigation step in one of disaster management phases that is suitable to prepare and use in mitigating the landslide hazard impact.