The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
Download
Publications Copernicus
Download
Citation
Articles | Volume XL-5/W4
https://doi.org/10.5194/isprsarchives-XL-5-W4-307-2015
https://doi.org/10.5194/isprsarchives-XL-5-W4-307-2015
18 Feb 2015
 | 18 Feb 2015

MIND YOUR GREY TONES – EXAMINING THE INFLUENCE OF DECOLOURIZATION METHODS ON INTEREST POINT EXTRACTION AND MATCHING FOR ARCHITECTURAL IMAGE-BASED MODELLING

G. Verhoeven, W. Karel, S. Štuhec, M. Doneus, I. Trinks, and N. Pfeifer

Keywords: Architecture, Colour, Decolourization, Feature, Imagery, Modelling, Point Cloud, Structure-from-Motion

Abstract. This paper investigates the use of different greyscale conversion algorithms to decolourize colour images as input for two Structure-from-Motion (SfM) software packages. Although SfM software commonly works with a wide variety of frame imagery (old and new, colour and greyscale, airborne and terrestrial, large-and small scale), most programs internally convert the source imagery to single-band, greyscale images. This conversion is often assumed to have little, if any, impact on the final outcome.

To verify this assumption, this article compares the output of an academic and a commercial SfM software package using seven different collections of architectural images. Besides the conventional 8-bit true-colour JPEG images with embedded sRGB colour profiles, for each of those datasets, 57 greyscale variants were computed with different colour-to-greyscale algorithms. The success rate of specific colour conversion approaches can therefore be compared with the commonly implemented colour-to-greyscale algorithms (luma Y’601, luma Y’709, or luminance CIE Y), both in terms of the applied feature extractor as well as of the specific image content (as exemplified by the two different feature descriptors and the various image collections, respectively).

Although the differences can be small, the results clearly indicate that certain colour-to-greyscale conversion algorithms in an SfM-workflow constantly perform better than others. Overall, one of the best performing decolourization algorithms turns out to be a newly developed one.