The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
Publications Copernicus
Articles | Volume XL-5
06 Jun 2014
 | 06 Jun 2014

Deformation monitoring with off-the-shelf digital cameras for civil engineering fatigue testing

I. Detchev, A. Habib, F. He, and M. El-Badry

Keywords: Infrastructure Monitoring, Dynamic Test, Sampling, Digital Close Range Photogrammetry, Precise Threedimensional Reconstruction, Processing

Abstract. Deformation monitoring of civil infrastructure systems is important in terms of both their safety and serviceability. The former refers to estimating the maximum loading capacity during the design stages of a building project, and the latter means performing regularly scheduled maintenance of an already existing structure. Traditionally, large structures have been monitored using surveying techniques, while fine-scale monitoring of structural components such as beams and trusses has been done with strain gauge instrumentation. In the past decade, digital photogrammetric systems coupled with image processing techniques have also been used for deformation monitoring. The major advantage of this remote sensing method for performing deformation monitoring is that there is no need to access the object of interest while testing is in progress. The paper is a result of an experiment where concrete beams with polymer support sheets are subjected to dynamic loading conditions by a hydraulic actuator in a structures laboratory. This type of loading is also known as fatigue testing, and is used to simulate the typical use of concrete beams over a long period of time. From a photogrammetric point of view, the challenge for this type of experiment is to avoid motion artifacts by maximizing the sensor frame rate, and at the same time to have a good enough image quality in order to achieve satisfactory reconstruction precision. This research effort will investigate the optimal camera settings (e.g., aperture, shutter speed, sensor sensitivity, and file size resolution) in order to have a balance between high sensor frame rate and good image quality. The results will be first evaluated in terms of their repeatability, and then also in terms of their accuracy. The accuracy of the results will be checked against another set of results coming from high quality laser transducers.