THE POSSIBILITY OF USING IMAGES OBTAINED FROM THE UAS IN CADASTRAL WORKS
Keywords: UAS/UAV, cadastral map, cadastre, buildings, parcels, photogrammetric measurements
Abstract. Updating the cadastre requires much work carried out by surveying companies in countries that have still not solved the problem of updating the cadastral data. In terms of the required precision, these works are among the most accurate. This raises the question: to what extent may modern digital photogrammetric methods be useful in this process? The capabilities of photogrammetry have increased significantly after the introduction of digital aerial cameras and digital technologies. For the registration of cadastral objects, i.e., land parcels’ boundaries and the outlines of buildings, very high-resolution aerial photographs can be used. The paper relates an attempt to use an alternative source of data for this task - the development of images acquired from UAS platforms. Multivariate mapping of cadastral parcels was implemented to determine the scope of the suitability of low altitude photos for the cadastre. In this study, images obtained from UAS with the GSD of 3 cm were collected for an area of a few square kilometres. Bundle adjustment of these data was processed with sub-pixel accuracy. This led to photogrammetric measurements being carried out and the provision of an orthophotomap (orthogonalized with a digital surface model from dense image matching of UAS images). Geometric data related to buildings were collected with two methods: stereoscopic and multi-photo measurements. Data related to parcels’ boundaries were measured with monoplotting on an orthophotomap from low-altitude images. As reference field surveying data were used. The paper shows the potential and limits of the use of UAS in a process of updating cadastral data. It also gives recommendations when performing photogrammetric missions and presents the possible accuracy of this type of work.