A

Amiri-Simkooei, A.

• CLEARANCE MEASUREMENT VALIDATION FOR HIGHWAY INFRASTRUCTURE WITH USE OF LIDAR POINT CLOUDS, pages 69–76

Anders, K.

• CHARACTERIZATION OF MORPHOLOGICAL SURFACE ACTIVITIES DERIVED FROM NEAR-CONTINUOUS TERRESTRIAL LIDAR TIME SERIES, pages 53–60

Antinozzi, S.

• A STATISTICAL ANALYSIS FOR THE ASSESSMENT OF CLOSE-RANGE PHOTOGRAMMETRY GEOMETRICAL FEATURES, pages 31–38

Antolínez, J. A. Á.

• CHARACTERIZATION OF MORPHOLOGICAL SURFACE ACTIVITIES DERIVED FROM NEAR-CONTINUOUS TERRESTRIAL LIDAR TIME SERIES, pages 53–60

B

Barcet, F.

• USING MACHINE LEARNING ON DEPTH MAPS AND IMAGES FOR TUNNEL EQUIPMENT SURVEYING, pages 1–7

Barylnik, S.

• IMAGE ORIENTATION BY EMBEDDING IN A GAN LATENT SPACE, pages 149–155

Bassier, M.

• AUTOMATIC CALCULATION OF VOLUME CHANGES IN ROAD CONSTRUCTION, pages 23–30

Betsas, T.

• 3D EDGE DETECTION AND COMPARISON USING FOUR-CHANNEL IMAGES, pages 9–15

Bordodymov, A.

• IMAGE ORIENTATION BY EMBEDDING IN A GAN LATENT SPACE, pages 149–155

Brambilla, P.

• METROLOGICAL CHARACTERIZATION OF A LASER-CAMERA 3D VISION SYSTEM THROUGH PERSPECTIVE-N-POINT POSE COMPUTATION AND MONTE CARLO SIMULATIONS, pages 17–21
• METROLOGICAL CHARACTERIZATION OF OPTICAL 3D COORDINATE MEASUREMENT SYSTEMS – COMPARISON OF ALTERNATIVE HARDWARE DESIGNS AS PER ISO 10360, pages 39–43

Buschinelli, P. D. V.

• SINGLE IMAGE LASER TRIANGULATION SYSTEM FOR 360° EXTERNAL INSPECTION OF CYLINDRICAL SHAPED OBJECTS USING INVERSE TRIANGULATION ALGORITHM, pages 111–117

C

Cavaco, M. A. M.

• SINGLE IMAGE LASER TRIANGULATION SYSTEM FOR 360° EXTERNAL INSPECTION OF CYLINDRICAL SHAPED OBJECTS USING INVERSE TRIANGULATION ALGORITHM, pages 111–117

Chan, T. O.

• MEASURING NUT VOLUMES USING THE AZURE KINECT, pages 103–110

Charbonnier, P.

• USING MACHINE LEARNING ON DEPTH MAPS AND IMAGES FOR TUNNEL EQUIPMENT SURVEYING, pages 1–7

Conese, C.

• METROLOGICAL CHARACTERIZATION OF A LASER-CAMERA 3D VISION SYSTEM THROUGH PERSPECTIVE-N-POINT POSE COMPUTATION AND MONTE CARLO SIMULATIONS, pages 17–21
• METROLOGICAL CHARACTERIZATION OF OPTICAL 3D COORDINATE MEASUREMENT SYSTEMS – COMPARISON OF ALTERNATIVE HARDWARE DESIGNS AS PER ISO 10360, pages 39–43

D

Dell’Amico, A.

• A STATISTICAL ANALYSIS FOR THE ASSESSMENT OF CLOSE-RANGE PHOTOGRAMMETRY GEOMETRICAL FEATURES, pages 31–38

E

Elnashef, B.

• SHAPE FROM POLARIZATION FOR FEATURELESS AND SPECULAR OBJECTS, pages 143–148

F

Fabris, D. M.

• METROLOGICAL CHARACTERIZATION OF A LASER-CAMERA 3D VISION SYSTEM THROUGH PERSPECTIVE-N-POINT POSE COMPUTATION AND MONTE CARLO SIMULATIONS, pages 17–21
• METROLOGICAL CHARACTERIZATION OF OPTICAL 3D COORDINATE MEASUREMENT SYSTEMS – COMPARISON OF ALTERNATIVE HARDWARE DESIGNS AS PER ISO 10360, pages 39–43

Fiamma, P.

• DIGITAL METHODOLOGIES FOR EXISTING BUILDINGS EMERGING EDUCATION AND TRAINING FOR PROFESSIONALS, pages 45–52

Filin, S.

• SHAPE FROM POLARIZATION FOR FEATURELESS AND SPECULAR OBJECTS, pages 143–148

Foucher, P.

• USING MACHINE LEARNING ON DEPTH MAPS AND IMAGES FOR TUNNEL EQUIPMENT SURVEYING, pages 1–7

di Filippo, A.

• A STATISTICAL ANALYSIS FOR THE ASSESSMENT OF CLOSE-RANGE PHOTOGRAMMETRY GEOMETRICAL FEATURES, pages 31–38

G

De Geyter, S.

• AUTOMATIC CALCULATION OF VOLUME CHANGES IN ROAD CONSTRUCTION, pages 23–30

Garagnani, S.

• DIGITAL METHODOLOGIES FOR EXISTING BUILDINGS EMERGING EDUCATION AND TRAINING FOR PROFESSIONALS, pages 45–52

Georgopoulos, A.

• 3D EDGE DETECTION AND COMPARISON USING FOUR-CHANNEL IMAGES, pages 9–15

H

Hulskemper, D.

• CHARACTERIZATION OF MORPHOLOGICAL SURFACE ACTIVITIES DERIVED FROM NEAR-CONTINUOUS TERRESTRIAL LIDAR TIME SERIES, pages 53–60

Höfle, B.

• CHARACTERIZATION OF MORPHOLOGICAL SURFACE ACTIVITIES DERIVED FROM NEAR-CONTINUOUS TERRESTRIAL LIDAR TIME SERIES, pages 53–60

van der Heide, D. H.

• CLEARANCE MEASUREMENT VALIDATION FOR HIGHWAY INFRASTRUCTURE WITH USE OF LIDAR POINT CLOUDS, pages 69–76

J

Jin, W.

• SHAPE FROM POLARIZATION FOR FEATURELESS AND SPECULAR OBJECTS, pages 143–148

K

Kahmen, O.

• INVESTIGATING DISTANCE-DEPENDENT DISTORTION IN MULTIMEDIA PHOTOGRAMMETRY FOR FLAT REFRACTIVE INTERFACES, pages 127–134

Karami, A.

• ORIENTATION OF IMAGES WITH LOW CONTRAST TEXTURES AND TRANSPARENT OBJECTS, pages 77–84

Kniaz, V. V.

• IMAGE ORIENTATION BY EMBEDDING IN A GAN LATENT SPACE, pages 149–155

Knyaz, V. A.

• IMAGE ORIENTATION BY EMBEDDING IN A GAN LATENT SPACE, pages 149–155

Kuschnerus, M.

• CHARACTERIZATION OF MORPHOLOGICAL SURFACE ACTIVITIES DERIVED FROM NEAR-CONTINUOUS TERRESTRIAL LIDAR TIME SERIES, pages 53–60

L

Liebold, F.

• AN APPROACH TO SUBPIXEL ACCURACY WIDENING CRACK WIDTH DETERMINATION IN IMAGE SEQUENCES, pages 61–68

Lindenbergh, R.

• CHARACTERIZATION OF MORPHOLOGICAL SURFACE ACTIVITIES DERIVED FROM NEAR-CONTINUOUS TERRESTRIAL LIDAR TIME SERIES, pages 53–60
• CLEARANCE MEASUREMENT VALIDATION FOR HIGHWAY INFRASTRUCTURE WITH USE OF LIDAR POINT CLOUDS, pages 69–76

Luhmann, T.

• SIMULATION-BASED ACCURACY INVESTIGATION OF A PHOTOGRAMMETRIC SETUP TO MEASURE A DYNAMIC PROCESS, pages 95–101
• INVESTIGATING DISTANCE-DEPENDENT DISTORTION IN MULTIMEDIA PHOTOGRAMMETRY FOR FLAT REFRACTIVE INTERFACES, pages 127–134

M

Maas, H.-G.

• AN APPROACH TO SUBPIXEL ACCURACY WIDENING CRACK WIDTH DETERMINATION IN IMAGE SEQUENCES, pages 61–68

Maspes, M. M.

• METROLOGICAL CHARACTERIZATION OF OPTICAL 3D COORDINATE MEASUREMENT SYSTEMS – COMPARISON OF ALTERNATIVE HARDWARE DESIGNS AS PER ISO 10360, pages 39–43

Meinderts, J. P.

• CLEARANCE MEASUREMENT VALIDATION FOR HIGHWAY INFRASTRUCTURE WITH USE OF LIDAR POINT CLOUDS, pages 69–76

Menna, F.

• ORIENTATION OF IMAGES WITH LOW CONTRAST TEXTURES AND TRANSPARENT OBJECTS, pages 77–84

Mizginov, V.

• IMAGE ORIENTATION BY EMBEDDING IN A GAN LATENT SPACE, pages 149–155

Morelli, L.

• ORIENTATION OF IMAGES WITH LOW CONTRAST TEXTURES AND TRANSPARENT OBJECTS, pages 77–84

Mortazavi, F. S.

• HIGH RESOLUTION SURFACE RECONSTRUCTION OF CULTURAL HERITAGE OBJECTS USING SHAPE FROM POLARIZATION METHOD, pages 85–93

Moshkantsev, P.

• IMAGE ORIENTATION BY EMBEDDING IN A GAN LATENT SPACE, pages 149–155

N

Nietiedt, S.

• SIMULATION-BASED ACCURACY INVESTIGATION OF A PHOTOGRAMMETRIC SETUP TO MEASURE A DYNAMIC PROCESS, pages 95–101

Novikov, D.

• IMAGE ORIENTATION BY EMBEDDING IN A GAN LATENT SPACE, pages 149–155

P

Peng, X.

• MEASURING NUT VOLUMES USING THE AZURE KINECT, pages 103–110

Petrovcic, S. A. B.

• SINGLE IMAGE LASER TRIANGULATION SYSTEM FOR 360° EXTERNAL INSPECTION OF CYLINDRICAL SHAPED OBJECTS USING INVERSE TRIANGULATION ALGORITHM, pages 111–117

Pexman, K.

• REGISTRATION AND FEATURE EXTRACTION FROM TERRESTRIAL LASER SCANNER POINT CLOUDS FOR AEROSPACE MANUFACTURING, pages 119–126

Pinto, T. L. F. C.

• SINGLE IMAGE LASER TRIANGULATION SYSTEM FOR 360° EXTERNAL INSPECTION OF CYLINDRICAL SHAPED OBJECTS USING INVERSE TRIANGULATION ALGORITHM, pages 111–117

R

Remondino, F.

• ORIENTATION OF IMAGES WITH LOW CONTRAST TEXTURES AND TRANSPARENT OBJECTS, pages 77–84
• CALIBRATION OF A MULTI-SENSOR WHEELED ROBOT FOR THE 3D MAPPING OF UNDERGROUND MINING TUNNELS, pages 135–142

Robson, S.

• REGISTRATION AND FEATURE EXTRACTION FROM TERRESTRIAL LASER SCANNER POINT CLOUDS FOR AEROSPACE MANUFACTURING, pages 119–126

Rofallski, R.

• INVESTIGATING DISTANCE-DEPENDENT DISTORTION IN MULTIMEDIA PHOTOGRAMMETRY FOR FLAT REFRACTIVE INTERFACES, pages 127–134

S

Saadatseresht, M.

• HIGH RESOLUTION SURFACE RECONSTRUCTION OF CULTURAL HERITAGE OBJECTS USING SHAPE FROM POLARIZATION METHOD, pages 85–93

Sala, R.

• METROLOGICAL CHARACTERIZATION OF OPTICAL 3D COORDINATE MEASUREMENT SYSTEMS – COMPARISON OF ALTERNATIVE HARDWARE DESIGNS AS PER ISO 10360, pages 39–43

Sanseverino, A.

• A STATISTICAL ANALYSIS FOR THE ASSESSMENT OF CLOSE-RANGE PHOTOGRAMMETRY GEOMETRICAL FEATURES, pages 31–38

Szrek, J.

• CALIBRATION OF A MULTI-SENSOR WHEELED ROBOT FOR THE 3D MAPPING OF UNDERGROUND MINING TUNNELS, pages 135–142

T

Tarabini, M.

• METROLOGICAL CHARACTERIZATION OF A LASER-CAMERA 3D VISION SYSTEM THROUGH PERSPECTIVE-N-POINT POSE COMPUTATION AND MONTE CARLO SIMULATIONS, pages 17–21
• METROLOGICAL CHARACTERIZATION OF OPTICAL 3D COORDINATE MEASUREMENT SYSTEMS – COMPARISON OF ALTERNATIVE HARDWARE DESIGNS AS PER ISO 10360, pages 39–43

Truong-Hong, L.

• CLEARANCE MEASUREMENT VALIDATION FOR HIGHWAY INFRASTRUCTURE WITH USE OF LIDAR POINT CLOUDS, pages 69–76

Trybała, P.

• CALIBRATION OF A MULTI-SENSOR WHEELED ROBOT FOR THE 3D MAPPING OF UNDERGROUND MINING TUNNELS, pages 135–142

Tual, M.

• USING MACHINE LEARNING ON DEPTH MAPS AND IMAGES FOR TUNNEL EQUIPMENT SURVEYING, pages 1–7

V

Vergauwen, M.

• AUTOMATIC CALCULATION OF VOLUME CHANGES IN ROAD CONSTRUCTION, pages 23–30

W

De Winter, H.

• AUTOMATIC CALCULATION OF VOLUME CHANGES IN ROAD CONSTRUCTION, pages 23–30

Wodecki, J.

• CALIBRATION OF A MULTI-SENSOR WHEELED ROBOT FOR THE 3D MAPPING OF UNDERGROUND MINING TUNNELS, pages 135–142

X

Xue, F.

• SHAPE FROM POLARIZATION FOR FEATURELESS AND SPECULAR OBJECTS, pages 143–148

Z

Zimroz, R.

• CALIBRATION OF A MULTI-SENSOR WHEELED ROBOT FOR THE 3D MAPPING OF UNDERGROUND MINING TUNNELS, pages 135–142